UC-240 ULTRASYNC IP & 4G/2G

UC-240 (SW)

Oprettelse og fakturering af Ultrasync konto foregår via Carrier (Aritech)

UltraSync Communicator is a dual path alarm signalling unit for transmitting alarm signals from a customer’s alarm panel to a Central Monitoring Stations (CMS). The monitoring path is based on IP and SIM 4G/2G mobile technology. The unit is designed for use in both security and fire systems.
• Dual-path monitoring for low, medium and high risk sites, covering intruder applications, fire and more.
• These monitored alarm signalling devices are small enough to fit inside most alarm panels. They use two signalling paths – if the primary path is down, the secondary path kicks in. And if that happens, the secondary path will use the primary path reporting and polling times.
• The primary path uses IP technology to send alarm signals over the customer’s network or broadband hub.
• The secondary path uses 4G or 2G mobile connectivity – with dual SIMs for extra resilience.
• EN50131 Grade 3 and EN50136 certified for intrusion systems.
• EN54-21 certified for fire alarm systems.

Alarm panel interfaces
• 16 general purpose alarm inputs (Logic High = +2V to +30V/Logic Low = <1.3V)
• 3 relay outputs
• Unconnected state: Logic Low
• Standard screw terminals
• Programmable function output-for remote control of site devices
• Line fault output-for status indication at site of alarm signalling path
• Dial Capture with phone line simulation
• Onboard RS232 or RS485 for direct panel interface to some panels

Dial Capture features
• Converts dialler alarm systems into high security signalling devices
• Alarm panel interface supports: Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA 1/2/3

Configuration
• Simple single push button pin learn
• iOS and Android installer app
• Using on board menu driven by push buttons