ETHERNET
ETH: Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover
Fibre: 2 x SFP ports
IEEE 802.3 series standards: 802.3i, 802.3u, 802.3ab, 802.3x
POE OUT
PoE ports: Port 1 - 8
PoE standards: 802.3af and 802.3at Alternative B
PoE Max Power per Port (at PSE): 30 W
Total PoE Power Budget (at PSE): 240 W
Maximum Ethernet cable length: 100 m
SERVICES
EtherNet/IP: Yes
Profinet (class B): Yes
SNMP V2, V3: Yes
LLDP: Yes
802.1x: Yes
NETWORK
MRP: MRP client role, MRP manager role
L2 features: Loop protection, Forwarding table, VLAN, STP/RSTP
DHCP: DHCP server, DHCP client
Port Settings: Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring
L3 Features: Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address
QOS
QOS: Port priority, DSCP priority, 802.1p priority, TOS
Scheduling method: SP/WFQ/WRR
Bandwidth control: Rate limiting, storm control
Traffic Shaper: Port-based shaping
DIAGNOSTICS
Tools: Cable diagnostic, ping, traceroute, nslookup
API
Teltonika Networks Web API (beta) support: Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
SYSTEM CHARACTERISTICS
RAM: 128MB, DDR3
FLASH storage: 16 MB serial flash
FIRMWARE / CONFIGURATION
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA: Update FW
RMS: Update FW/configuration for multiple devices at once
Keep settings: Update FW without losing current configuration
FIRMWARE CUSTOMISATION
Operating system: WitchOS (OpenWrt based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking): 20 Gbps
Forwarding rate: 14.88 Mpps
Packet buffer: 512 KB
MAC address table size: 8K entries
Jumbo frame support: 10000 bytes
POWER
Connector: 2-pin industrial DC power socket
Input voltage range: 7 – 57 VDC
PoE-out input voltage range: 44 – 57 VDC
Power consumption: Idle: < 3 W / Max: 8 W / PoE Max: 248 W
PHYSICAL INTERFACES
Ethernet: 8 x RJ45 ports, 10/100/1000 Mbps
Fibre: 2 x SFP ports
Status LEDs: 1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs
Power: 1 x 2-pin industrial DC power socket
Reset: Software reset button
Other: 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material: Anodized aluminum housing and panels
Dimensions (W x H x D) : 132 x 44.2 x 122.2 mm
Weight: 610 g
Mounting options: Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature: -40 °C to 75 °C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30
REGULATORY & TYPE APPROVALS
Regulatory: CE, UKCA, RCM, ANRT, FCC, IC, CB, RoHS, REACH
EMC EMISSIONS & IMMUNITY
Standards : EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2: 2019 + A1:2021, EN 61000-3-3: 2013 + A1:2019 + A2:2021
ESD :EN 61000-4-2:2009
Radiated Immunity :EN IEC 61000-4-3:2020
EFT : EN 61000-4-4:2012
Surge Immunity (AC Mains Power Port): EN 61000-4-5:2014 + A1:2017
CS : EN 61000-4-6:2014
DIP : EN 61000-4-11:2020
SAFETY
Standards : CE: EN IEC 62368-1:2020 + A11:2020, RCM: AS/NZS 62368.1:2022, CB: IEC 62368-1:2018
Antal porte 10/100/1000 Mbps RJ45 | 8 |
Antal porte 1000 Mbps Mini GBIC | 2 |
Antal PoE porte | 8 |
Power over Ethernet | 802.3 at (PoE+) |
Max. PoE effekt | 240 W |
Bredde | 132 mm |
Dybde | 122.2 mm |
Ethernet | Ja |
Højde | 44.2 mm |
Kapslingsklasse (IP) | IP30 |
Lag 2 | Ja |
Lag 3 | Ja |
Managed | Ja |
Monteringsmetode | DIN-skinne |
Fødevarekontaktmateriale | Nej |
REACH - indeholder produktet stoffer fra kandidatlisten? | Nej |